Buy wristwatch TRES 40 mm online

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Watch straps No accessory influences the style of a...

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

Print out your own modelYou can download a realistic...

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Quartz 40 mm from BOTTA

Symbiosis of function and design
This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself. The seconds indicator, in the form of a broken circle in the centre of the dial, also underlines the minimalist and exceptional design of the TRES.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted, as the two strap lugs are concealed beneath the dial to optimize space.

"The new TRES is for people with the highest standards for design and quality."

With its 40 mm diameter the TRES Quartz is perfectly suitable for narrow wrists thanks to the integrated strap lugs. The two bevelled flanks on the underside of the case also allow considerably more freedom of movement for the wrist and forearm, thus allowing the air to circulate better at the same time. The design of the reverse side makes the 4.9 mm high watch look even flatter. No matter from which perspective you look at the new TRES Quartz, it always looks architecturally clear and aesthetic.

The double-domed sapphire crystal with its accentuated narrow titanium top ring complements the elegant lines of the entire watch. The anti-reflective coating on both sides of the watch glass provides a significantly improved transparency and colours the considerably reduced reflections on the watch glass with a subtle bluish shimmer.

The movement: high-quality, accurate and absolutely reliable

The quartz version of the TRES Quartz watch from BOTTA design is driven by a Swiss-Made Ronda quartz movement. Unlike the much cheaper “Swiss-Parts” movements, the components in this movement are manufactured and assembled entirely in Switzerland.

The original Ronda movement ensures that the TRES Quartz will run smoothly and precisely for many years, which reflects the BOTTA principle of technical and design durability in its German-Made watches.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	40 mm
Height	5,5 mm
Weight	32 g
Movement	Quartz, RONDA 1062 Swiss-made, battery type 321
Date	No
Case material	100 % titanium
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap
Special features	Three-hand watch
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

UNO

The Original

UNO 24

Extraordinarily logical

TRES

Sophistication in every Detail

TRES 24

Techno-Logic

NOVA

Minimalist Eccentricity

CLAVIUS

Space for your time

MONDO

The Worldtime Manager

SALE

Limited Clearance

straps

The most important accessory of a watch

Accessories

Everything for your BOTTA watch

UNO

The Original

UNO 24

Extraordinarily logical

TRES

Sophistication in every Detail

TRES 24

Techno-Logic

NOVA

Minimalist Eccentricity

CLAVIUS

Space for your time

MONDO

The Worldtime Manager

TRES Quartz 40mm

€448,00 incl. VAT (within the EU)

€448,00 incl. VAT (within the EU)

€448,00

TRES Quartz 40 mm from BOTTA

Consistent logical design, down to the last detail

"The new TRES is for people with the highest standards for design and quality."

The movement: high-quality, accurate and absolutely reliable

Watch straps

Technical data

Print out your own model

TRES Quartz 40 mm from BOTTA

Consistent logical design, down to the last detail

"The new TRES is for people with the highest standards for design and quality."

The movement: high-quality, accurate and absolutely reliable

Technical data

Print out your own model

TRES Quartz 40 mm from BOTTA

Consistent logical design, down to the last detail

"The new TRES is for people with the highest standards for design and quality."

The movement: high-quality, accurate and absolutely reliable

Watch straps

Technical data

Print out your own model

TRES Quartz 40 mm from BOTTA

Consistent logical design, down to the last detail

"The new TRES is for people with the highest standards for design and quality."

The movement: high-quality, accurate and absolutely reliable

Watch straps

Technical data

Print out your own model

TRES Quartz 40 mm from BOTTA

Consistent logical design, down to the last detail

"The new TRES is for people with the highest standards for design and quality."

The movement: high-quality, accurate and absolutely reliable

Watch straps

Technical data

Print out your own model

TRES Quartz 40 mm from BOTTA

Consistent logical design, down to the last detail

"The new TRES is for people with the highest standards for design and quality."

The movement: high-quality, accurate and absolutely reliable

Watch straps

Technical data

Print out your own model

TRES Quartz 40 mm from BOTTA