Buy TRES Automatic 44mm online

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

TRES Automatic 44 mm from BOTTA Symbiosis of function...

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Watch straps No accessory influences the style of a...

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

Print out your own modelYou can download a realistic...

TRES Automatic 44 mm All Black from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

TRES Automatic 44 mm All Black from BOTTA Symbiosis...

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

HOW TO SET YOUR WATCH CORRECTLY

Easily comprehensible step-by-step instructions showing how to correctly set your Botta wristwatch can be downloaded here. Depending on the particular functions of your watch, the setting options will differ in some cases considerably. You will always find the instructions for your individual model in the section entitled “How to set your watch correctly”. If you still find you have some questions, please do not hesitate to call us directly.

Download pdf instruction

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

HOW TO SET YOUR WATCH CORRECTLY

Easily comprehensible step-by-step instructions showing how to correctly set your Botta wristwatch can be downloaded here. Depending on the particular functions of your watch, the setting options will differ in some cases considerably. You will always find the instructions for your individual model in the section entitled “How to set your watch correctly”. If you still find you have some questions, please do not hesitate to call us directly.

Download pdf instruction

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm All Black from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm All Black from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

HOW TO SET YOUR WATCH CORRECTLY

Easily comprehensible step-by-step instructions showing how to correctly set your Botta wristwatch can be downloaded here. Depending on the particular functions of your watch, the setting options will differ in some cases considerably. You will always find the instructions for your individual model in the section entitled “How to set your watch correctly”. If you still find you have some questions, please do not hesitate to call us directly.

Download pdf instruction

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm All Black from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm All Black from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm All Black from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44 mm All Black from BOTTA

Symbiosis of function and design

This third generation of the TRES line stands out immediately with its creative clarity and the graphic precise lines. The three slim hands allow the time to be read very accurately on the finely drawn 60th scale. Only at second glance does the discreet numbering between the hour markings and the edge of the case reveal itself.

Consistent logical design, down to the last detail

An analogue time display fits best into a circular watchcase. Accordingly, all TRES models have a perfectly cylindrical stainless steel or titanium case. It is the design and the mounting of concealed strap lugs inside the base of the case that make it possible to develop a watch with such formal clarity.

However, good design is not limited to aesthetics alone. Apart from the captivating logic of the case construction and the dial, the back of the watch has also been carefully crafted as the two strap lugs are concealed beneath the dial to optimise space. In between these we can find the sapphire crystal on the back with its finely engraved stainless steel bezel. It provides a clear view of the mechanical drive of the watch, the extremely reliable ETA automatic movement 2824-2.

The movement

A sophisticated display principle also deserves a high-quality movement. We have opted to use the Sellita SW 200-1 elaboré Swiss-made automatic movement, which is one of the most reliable mechanical movements available. This gives you the very best chance of still deriving great pleasure from your purchase even after many years. In addition, every single movement spends several days being carefully adjusted for maximum precision by a watchmaker – this is our way of contributing to your punctuality.

Watch straps

No accessory influences the style of a watch as significantly as its strap. Whether elegant Milanese strap, sporty rubber strap or classic leather strap – we have the same high standards of design and quality for all our straps as for our watches themselves.

Discover the fine selection of high-quality BOTTA straps and give your watch a very individual character.

Learn more

Technical data

Diameter	44 mm
Lug-To-Lug	33,7 mm
Height	8,9 mm
Weight	56,1 g (without strap)
Movement	Automatic, Sellita SW 200-1 elaboré Swiss Made, individually adjusted by hand
Date	Yes
Case material	stainless steel
Glass type	Double domed sapphire crystal with double scratch resistant anti-reflection coating
Water resistance	5 ATM
Strap	finest, vegetable tanned leather wrist strap \| rubber strap \| steel link \| saddle leather strap \| milanaise strap
Special features	Three-hand watch with date
Country of manufacture	Germany
Warranty	Two years, excluding wear parts and improper handling

Print out your own model

You can download a realistic cut-out model of this watch in PDF format here and print it out. You can then cut out the 1:1 paper model and place it on your wrist like a real watch. The model will give you a realistic impression of the size of the watch and how it will look on your wrist. For best results, use a good-quality colour printer and stable glossy paper. Enjoy trying on the “watch”!

To paper model

TRES Automatic 44mm

$1,486.00

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm All Black from BOTTA

Consistent logical design, down to the last detail

The movement

Technical data

HOW TO SET YOUR WATCH CORRECTLY

Print out your own model

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Technical data

HOW TO SET YOUR WATCH CORRECTLY

Print out your own model

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm All Black from BOTTA

Consistent logical design, down to the last detail

The movement

Watch straps

Technical data

Print out your own model

TRES Automatic 44 mm All Black from BOTTA

Secure purchasing
from BOTTA